As the blued handgun was impracticable in many situations, nickel-plated firearms were created. Nickel handguns were particularly popular in police enforcement in many hot, humid, and salty environments. The biggest disadvantage of the nickel-plated gun was that it was more expensive than blued firearms.
By today’s standards, the expense was not much, but earlier in the day the variance would add up to a day’s wages or more. As a result, a nickel-plated handgun is seen as a prestige symbol.
How to Polish a Nickel-Plated Gun
To make the technique easier to grasp, we’ll break it down into many phases. This will also make the job method easier to follow.
Here’s a bit of advice: put all of your tools within arm’s reach. Things will become a mess once you begin working with the polish. Maintain a clean cloth on hand for this purpose.
1st step:
The first step is to dismantle the nickel-plated gun. Disassemble the revolver into separate pieces.
Next, remove the nickel connections from each component. Remove any detachable components from the rifle. Cleaning the inside of the pistol becomes easier as a result.
2nd Step:
The following step will be to select an appropriate cleaner. When selecting a cleaner, examine the ingredient list to see whether there are any harmful chemicals.
If any corrosive chemicals are used, skip the cleaning. However, if the assessment is negative, go to the next stage.
3rd step:
Let’s get started cleaning the pistol. Take a good quantity of polish and apply it to the cloth. Then, using quick finger strokes, distribute it across the cloth.
This cloth will be used to clean all of the gun’s polished components. Use circular, soft strokes for the best results.
4th step:
Once you’ve finished polishing the nickel-plated rifle, all that’s left is a thorough cleaning. Take the wash and dry edge of the cloth for this.
Buff the freshly polished gun to eliminate any excess metal shine. This will eventually bring out the gloss that you desire.
5th step:
With this final step, the polishing process is complete. The only thing left to do is reassemble the rifle.
This step necessitates additional vigilance. The polish is still in its early stages. As a result, any fingerprints will leave indentations on the surface.
Once the gun has been assembled, keep it in a clean and dry area to avoid dirt and discoloration.
As well as cleaning your nickel-plated rifle is all done.
What You’ll Need to Polish a Nickel-Plated Gun?
Alloy guns are often sensitive to certain chemicals. Nickel-plated firearms are no exception.
Nickel will corrode severely if it comes into contact with anything that contains hydrogen embrittlement. Aside from that, you may clean the nickel-plated rifle with whatever you choose.
There are no special tools required for polishing.
To clean the gun, the first thing you’ll need is a lint-free cloth. A metal cleaner is required for thorough cleaning.
You may use any appropriate metal glo polish to polish it and that is perfectly OK.
No. 9 Hoppes 2oz:
No. 9 Hoppes 2oz Cleaner for pistols, rifles, shotguns, and other firearms. 2.2 ounces Hoppes No 9 Lubricating Lubricant – A high viscosity oil that has been fine-tuned for use in weapons, fishing reels, and other precise systems. Do not harden, gum up, or get rotten. Provides exceptionally extended service.
40-50 Westlake Market Nylon Patches for Cleansing Gun. All of our products are made in the United States! We respect each customer’s experience. We provide a money-back or refund warranty if there is a quality fault or any other reason for your unhappiness with this item.
GLORYFIRE Universal Gun Cleaning Kit:
Universal cleansing accessory set for cleaning shotguns, rifles, and pistols. You’ll find everything you need to wash common-caliber firearms in a little case. Our case is built to keep the parts in place.
All of our slotted tips and cleansing swabs are constructed of high-quality nylon polymer. Other companies’ sets utilize cheap plastic tips that readily shatter after two uses. With this set, you won’t have to deal with the aggravation of a broken jag/tip within your rifle barrel.
Convenient and transportable: Using this cleaning/maintenance package will keep your firearms functioning at their peak. The lightweight, robust plastic carrying case keeps everything tidy and organized.
How do you keep a nickel-plated revolver shiny?
Cleaning nickel finishes on pistols or rifles necessitates the use of particular metal polish to keep the nickel plating from wearing away after repeated burnishing and cleansing with harsher chemicals. To avoid the cream polishing paste drying up in difficult-to-clean spots, thoroughly dismantle the handgun before polishing the nickel finish. Buff away the dry metal polish with a clean, soft cloth.
you’ll need
- Metal-Glo metal polish or another type of specialist metal cleaner
- lint-free cloths
Disassemble the firearm, removing the polished nickel parts from the wood, steel, or composite parts.
Apply a little quantity of metal polish to the cloth and rub it into the fibers with your thumb and fingertip.
Working in tiny circles, carefully rub the polished metal portions of the pistol with the polish on the cloth.
Buff the polished metal surfaces of the handgun with a clean, dry cloth to remove any leftover dried metal polish and pull out the nickel’s sheen. To eliminate significant discoloration, polish twice.
Reassemble and store the handgun with care to avoid fingerprints, dust, or discoloration on the newly smooth surface.
What is the easy way to clean a nickel-plated handgun?
The majority of factory nickel-plated firearms might not have a copper coating.
In any case, good pistol cleaning using Hoppe’s 9 will not destroy your plate. Guns are not soaked in a bore cleaning agent. If any falls on the gun, simply wipe it clean.
If your rifle had copper underplating and you bathed it in Hoppe’s for a day, it probably wouldn’t hurt.
It’s an ancient wives’ tale from many years ago. Rusted firearms, particularly those shot with black powder but not cleaned, would have nickel strip off when cleaned. The flaking was caused by corrosion that ate beneath the plating, not by the cleaning solution.
After completely wiping away the CLP, use a jeweler’s rag to clean the Nichol back to its former glory. I’m sure your family has one.
The fabric has two sides to it. One is used for cleaning and roughening the Nichol. Another side is utilized for removal and polishing.
When the Nichol and wood grip are as shiny as new, apply Renaissance Wax on them. There has never been a finer product for cleaning, protecting, and shining.
How Do You Remove Rust from A Gun Without Ruining It?
To oxidize the steel, gunsmiths will utilize a hot bluing process. Rust is converted into black iron oxide, which provides the metal with a blue hue. Cold bluing a gun is also an option, although the protective coating isn’t as long-lasting as hot bluing.
If you have a favorite handgun or rifle that is starting to develop red rusty spots, you may be hesitant to try to remove them since you don’t want to destroy the bluing. Surface rust can be removed using one of three procedures, all of which rely on moderate rust elimination followed by lubrication.
Technique 1: Using a Brush, Cotton Ball, and Gun Oil:
A toothbrush, fine metal wool, and a cleaner/lubricant protective spray can be used. First, coat your pistol with CLP and let it sit for at least a half-hour. Then, using the toothbrush, lightly massage the body of your firearm.
Examine your rifle for areas where rust has remained. Apply CLP directly to such surfaces, then clean with steel wool to remove any remaining residue.
Technique 2: Penetrating Oil and a Copper Penny:
Examine your gun carefully for specific spots of rust. Spray a cleaning and degreasing lubricant over the affected areas. Allow it to sit for at least a half-hour. Scrape the rust from the surface with a dime. Wipe off the affected areas with a cotton swab rag or microfiber cloth. Consider using a weapons-grade gun lubricant or a protected gun wax, including Renaissance Wax, to safeguard metal components.
Technique 3: Using a Lead Pen and Oil:
This is usually only effective on tiny areas of surface rust. This approach is similar to the first in that a mild abrasive, pencil lead, is used to scrape away the rust. Surface rust will be removed if done gently and softly.