6 Common Sig P938 Legion Problems And Their Solutions

Got a SIG P938 Legion that’s acting up? No biggie. Whether it’s a trigger with an issue, a magazine that’s not cooperating, or sights that just won’t stay put, we’ve all been there. Worry not, there’s usually a fix that’s not too complicated.

Most problems you’ll run into with the P938 Legion can be solved with something as simple as giving it a good clean, tweaking a few things here and there, or just getting to know your gun a bit better. 

From basic troubleshooting to easy fixes, we’ve got everything you need to sort out your Legion issues. Ready to fix up your SIG and get back to shooting? Let’s get into it!

Common Sig P938 Legion Problems & Solutions Overview

This table offers a structured approach to identifying and addressing common issues with the Sig P938 Legion.

Some Common Problems Reported by Users:

Accuracy Concerns

Struggling with accuracy on your Sig P938 Legion? It’s kind of like trying to thread a needle in dim light. 

While the Sig P938 Legion is designed for accuracy, some users have noted difficulties in achieving consistent shot placement. Fear not, we are here to sort it out.

The Fix

This can be due to a variety of factors including sight alignment, grip, and the inherent challenge of shooting accurately with a compact firearm. 

Start with the basics: check your grip and stance—foundation is key, like getting your footing right before a jump. Peek at your sights; maybe they need a little tweak, just like adjusting your chair for the perfect desk height. 

Experiment with different ammo; your Sig might be picky, similar to finding the right brand of coffee that hits the spot. Practice makes perfect, right?

And if it’s still off, consider a check-up by a pro, sort of like getting a tune-up for your car. Tighten up these areas, and you’ll likely see your shots hitting the mark.

Finish and Wear

Noticed your Legion’s shine isn’t what it used to be? Yeah, you’re not alone. 

That slick finish sure turns heads, but some of us are finding it’s not quite as tough as we hoped for everyday wear and tear.

The Fix

Though it might happen to the best of us, no worries…we have got your back. First step: are you cleaning it right? A soft cloth and the right cleaner can go a long way in preventing unnecessary scratches. 

And what about lubrication? You’re doing it, but are you doing it enough? Just a few drops of quality gun oil on the moving parts can make a difference, reducing friction and wear.

Now, seeing some serious wear spots? Ever thought about giving it a new coat of armour? A cerakote finish isn’t just cosmetic—it’s like giving your gun a bulletproof vest against wear and corrosion.

And for those small touch-ups, there’s always touch-up paint for firearms. Matching the finish can be tricky, but get it right, and it’s like those scratches were never there. 

Magazine Ejection Issues

You know, the one where you’re just going about your business, shooting, and suddenly, whoops, there goes your magazine, deciding it’s time for a little unscheduled escape. 

Annoying? Absolutely. A bunch of P938 Legion owners have seen their mags drop during action. And it doesn’t matter if it’s the snappy 6-rounder or the more generous 7-rounder.  

Some people thought maybe they were pressing the release by accident, but it’s looking more like a sneaky little design issue.

The Fix

Here’s where things get DIY. 

Quick Grip Check: Next time at the range, watch that thumb! Make sure it’s not getting too friendly with the magazine release. Finding the right grip might need a bit of trial and error but keep those digits away from places they shouldn’t wander.

Mag Release Inspection: Take a quick look at your mag release. If it’s protruding more than usual or feels too soft, think about swapping it for a flusher fit or a tighter spring. Small change, potentially big fix.

Magazine Check: A slightly off mag could be the reason.

Sig Support: Still seeing your mags make a run for it? Time to give Sig Sauer a shout. They’re pretty great at troubleshooting and fixing any design issues.

Feeding and Ejection Inconsistencies

Ever have those days where nothing seems to go right? The P938 Legion can relate. Some rounds just don’t want to cosy up into the chamber, and spent casings play hide instead of seek with ejection. 

It’s frustrating, especially if you need reliability.

The Fix

Let’s make it straight. Stick to good ammo, clean regularly, check those magazines, and don’t skimp on the oil. Keeping your Sig P938 Legion in top shape is all about the basics. Do these, and you’ll see a marked improvement in performance. Here are the steps to make it clear-

Use Quality Ammo: Your Sig is picky. High-quality ammo = fewer feeding problems.

Keep It Clean: Regular cleaning, especially the barrel and feed ramp, prevents jams.

Inspect Your Magazines: What to look for? Bent feed lips or weak springs can cause issues. Consider replacing them if they look worn out.

Lubricate Properly: A little gun oil goes a long way. Apply it to moving parts after cleaning to ensure smooth operation.

Cold Start Issues

You know how first impressions are a big deal? Well, the P938 Legion doesn’t always nail it on the first try. Right out of the box, it might give you some trouble with feeding, ejecting, or even firing. 

Sure, it tends to shape up after a bit of use, but who’s got time for that?

The Fix

Here’s how to get it running smoothly from the get-go:

Treat Your Sig Right: Think of prepping your Sig like getting a good friend ready for tomorrow. A quick clean and some oil mean you’ll both wake up ready to roll.

Pick Good Ammo: It’s like choosing a solid breakfast for energy. Good ammo keeps your Sig happy and smooth.

Warm-Up: If your Sig’s been in the cold, let it warm up to the day. No shock, just a smooth start.

Slide Stretch: Give the slide a few quick pulls before you start. It’s like stretching; gets everything moving right.

Just a little care and the right ammo make all the difference. Your Sig’s ready to have a good day with you, no fuss, just fun shooting.

Guide Rod Problems

Ever been totally dialled in at the range, and suddenly your P938 Legion’s guide rod decides it’s had enough and starts to loosen? 

Yeah, not exactly what you want when you’re trying to shoot straight.

The Fix

First thing’s first, give it a good look-over and a clean. Sometimes, it’s just gunked up. But if it’s still acting up, it might be time for a new one. And when you’re putting it back together, make sure it sits just right.

Keeping that guide rod in top shape really smooths out your Sig’s action, making every shot that much better

Read More: Common SIG P365 Problems and How to Solve Them

Front Sight Alignment

You know how annoying it is when you’re aiming down sight, and it just feels… off? Like when you’re trying to take a picture, but can’t get the framing right. Super frustrating, especially when you’re trying to nail those precise shots.

The Fix

Sometimes it just needs a little tightening. Use a sight adjustment tool for precision—no heavy-handed moves needed here. After adjusting, hit the range to test. Small tweaks can make a huge difference.

It’s all about those minor adjustments for major improvements. Aim true and shoot well! Sometimes you might need a pro’s touch. A gunsmith can realign those sights and get you back on target. It’s a quick fix for a straighter aim.

Trigger Issues

Got trigger troubles with your Sig P938 Legion? It’s a bit like trying to get comfortable with your car’s clutch pedal; you want it to feel just perfect. 

If your trigger’s not behaving – maybe it’s too stiff, too soft, or just feels rough – it can really mess with your aim. Time to sort that out, right?  Here we go.

The Fix

Start with a good clean – it’s often just some dirt messing things up, like dust jamming up a machine.

If that doesn’t do the trick, eyeball the trigger mechanism for any wear or something off. It’s a bit like playing detective.

Still not feeling it? Think about getting a new trigger. The right aftermarket one can be a game-changer, kinda like swapping a worn-out mattress for a comfy new one.

Not too sure about fiddling with it yourself? Call in an expert. It’s like having a chef fix your dinner – they just know how to make it perfect.

So, to wrap up: clean it, check it out, maybe upgrade. Fixing your trigger can make shooting a whole lot more fun.

Detailed User Experiences and Case Studies

We analysed real-life experiences from various sources, including forums and Reddit, to understand issues with the Sig P938 Legion pistol. Key findings include:

Case Study 1- Magazine Ejection: An experienced shooter noted the magazine ejected every 2-3 shots. After exhaustive testing and contacting Sig Sauer, replacing the magazine release mechanism under warranty fixed the issue, pointing to a defective part. This suggests defective parts could be at fault. (Reference: SigSauerGuns.com)

Case Study 2- Feeding Malfunctions: A forum user experienced a 40% failure rate in ammunition feeding. After servicing by Sig Sauer, which included polishing the feed ramp and replacing the recoil spring, performance improved, though some issues persisted with hollow-point ammo. Discussion on Reddit’s r/Firearms)

Case Study 3- Guide Rod Problems: After 500 rounds, another owner faced guide rod  loosening, causing feed and eject failures. A replacement one-piece guide rod from Sig Sauer solved the issue. (Insights shared on TheFirearmBlog.com)

Case Study 4- Front Sight Misalignment: One user found their new pistol’s front sight misaligned. Despite attempts to fix it themselves, factory recalibration was required, raising concerns about quality control. This raised quality control concerns among users. (User experiences detailed at SigForum.com)

Case Study 5- Cold Start Issues: Documented by an owner on a shooting forum, the pistol failed to feed and eject properly at the start of use, attributed to excessive dirt in the firing pin channel. Regular cleaning reduced the problem, suggesting a need for frequent maintenance. (Advice found on ShootingIllustrated.com)

Manufacturer’s Response: Sig Sauer acknowledged the reported issues, offering individual support rather than issuing a general recall. They encouraged owners to reach out to their customer service for solutions. Design improvements, including a more robust magazine release spring and a switch to one-piece guide rods in new models, were implemented based on feedback. 

These changes aim to enhance reliability and user satisfaction. (Official response from SigSauer.com/support)

Preventive Measures and Best Practices For Quality Control

Having trouble with your Sig P938 Legion? That’s disappointing. Here are some steps you might follow to keep it fit-

Inspect closely, if you still can’t figure the solutions out from here, talk to Sig Sauer’s customer service. Meanwhile, pop into online gun forums. Some links are given below to help you out- direct link to the discussion: New P938 Legion problems and resolution | SIG Talk. A few more forum links that might provide further information or discussion about Sig P938 Legion issues:

•  P938 legion mag problems – Topic – SIGforum.com, 
• Sig P938 Problem – The Firing Line Forums, 
• Sig P938 questions – 1911Forum

Some common issues discussed previously. Here, we provide detailed preventive measures and best practices to maximise Sig P938 Legion Performance: 

Regular Maintenance: Clean every part of your pistol thoroughly after use or every three months to avoid malfunctions. Pay extra attention to the barrel and feed ramp; a clean ramp is crucial for smooth ammo feeding.

Lubrication Tips: After cleaning, apply a high-quality gun oil to the slide rails, barrel, and other moving parts, but remember, less is more. Over-lubrication attracts grime.

Magazine Care: Annually inspect your magazines. Look out for wear or damage on springs, followers, and feed lips. Replacing faulty magazines can nip feeding issues in the bud.

Recoil Spring Refresh: Swap out the recoil spring every 1,500 to 2,000 rounds. This can prevent many common feeding and ejection problems and is a simple way to keep your firearm functioning smoothly.

Improve Your Grip: Practice holding your pistol firmly. A stable grip not only boosts accuracy but also prevents issues like unintended magazine releases.

Practice Regularly: Familiarise yourself with your firearm’s specific characteristics through consistent practice. Understanding its recoil, trigger pull, and manual operations can significantly reduce user-induced errors.

Ammo Compatibility: Experiment with various ammo brands and types to find the best match for your P938 Legion. Subcompact pistols often show a preference for certain rounds, and identifying a compatible ammo type is key to reliable operation.

Ammo Management: Rotate your carry ammunition to ensure it remains reliable over time. Using older rounds at the range and replacing them with new ones keeps your defence ammo in peak condition.

Optimal Storage: Store your firearm in a controlled environment to prevent rust and corrosion. In humid areas, consider a dehumidifier or a protective case for long-term storage.

Document Everything: Keep a detailed log of maintenance, rounds fired, and any issues. This log can be invaluable for troubleshooting and maintaining a history of your firearm’s performance.

Seek Professional Help When Needed: For tasks beyond basic maintenance or if you’re unsure about a repair, consult a reputable gunsmith. Properly executed repairs or upgrades can make a significant difference.

Choose Upgrades Wisely: While aftermarket parts can enhance performance, select them carefully to ensure they’re compatible with the P938 Legion. Quality parts from established manufacturers are generally a safer bet.

Thoughtful Customizations: Although customization can tailor the firearm to your preferences, excessive modifications might affect reliability. Keep changes minimal and focused on enhancing performance.

Specifications and Features

This table outlines the key features that make the SIG P938 Legion a favoured choice for concealed carry, highlighting its compact size, durability, and enhanced user experience through thoughtful design upgrades

Final Thoughts

The Sig P938 Legion is a neat little gun with some cool features but also a few issues. Great for staying hidden and powerful. It feels good in your hand, too.

But, it’s got some trouble. Like magazines that might drop or bullets not loading right. It’s hit or miss—some people have zero problems, others do.

To steer clear of issues, pick the right ammo, keep it clean, and maybe adjust how you shoot. Into customising? There are plenty of options, just be mindful it doesn’t complicate things.

In a nutshell, picking the Sig P938 Legion is about balancing the good with the possible glitches. It’s a personal choice, kind of like finding your favourite hat or the perfect coffee.

FAQs: Sig P938 Legion Problems & General Questions

1. What are common issues with the Sig P938 Legion?

Common issues reported by users include unintentional magazine ejection during use, failures to feed certain types of ammunition, problems with the guide rod, occasional misalignment of front sights, and the need for frequent maintenance and part replacements to maintain optimal functionality.

2. How has Sig Sauer addressed these issues?

Sig Sauer has actively engaged with customers to resolve these concerns, offering replacement parts, servicing defective units under warranty, and implementing design changes in later production models to address the early issues identified by users.

3. What is the difference between P938 vs P938 Legion?

The P938 Legion features upgrades over the standard P938, including a Legion grey PVD finish on the slide and frame, custom G-10 grips with a Legion medallion, a more precise trigger, and an enhanced action with a short reset trigger. The Legion series also offers exclusive access to Sig Sauer’s Legion club.

4. Does the Sig Sauer P938 have safety?

Yes, the Sig Sauer P938 is equipped with a manual thumb safety located on the left side of the frame. This allows the firearm to be carried safely with a round in the chamber, in the “cocked and locked” position.

5. Where is Sig Sauer P938 made?

The Sig Sauer P938 is manufactured in the United States at Sig Sauer’s facilities.

6. Is the Sig P938 reliable?

The Sig P938 is generally considered reliable, especially for a subcompact pistol. However, like any firearm, its reliability can be affected by factors such as maintenance habits, ammunition choice, and individual manufacturing variances. While some owners report flawless performance, others have encountered issues that could impact the pistol’s reliability.

7. Can modifications or aftermarket parts solve some of the Sig P938 Legion’s issues?

Yes, certain modifications and aftermarket parts may address specific issues or enhance the pistol’s performance. However, it’s important to choose high-quality parts from reputable manufacturers and consider the potential impact on your warranty and the firearm’s reliability.

8. Is the Sig P938 Legion suitable for everyday carry (EDC)?

Yes, the Sig P938 Legion can be an excellent choice for EDC due to its compact size, powerful calibre, and quality construction. However, as with any EDC firearm, it’s important to be familiar with its operation, ensure it’s well-maintained, and practice regularly to be confident in its reliability and your ability to use it effectively.